Selasa, 29 Juni 2010

bakti sosial donor darah di PT NTP



“Dan barang siapa yang memelihara kehidupan seorang manusia, maka seolah-olah dia telah memelihara kehidupan manusia semuanya”. (QS. Al-Maidah ayat 32).

Menyumbangkan darahnya kepada seseorang yang membutuhkan adalah pekerjaan kemanusiaan yang sangat mulia. Karena dengan mendonorkan sebagian darahnya berarti seseorang telah memberikan pertolongan kepada orang lain, sehingga seseorang selamat dari ancaman yang membawa kepada kematian. Karena menyumbangkan darahnya dengan ikhlas kepada siapa saja termasuk amal kemanusiaan yang amat dianjurkan oleh Islam. Seperti halnya orang memberi makan kepada orang lapar yang terancam akan mati.

Bahagia rasanya melihat rekan2 karyawan dan karyawati berbondong2 dengan rona yang penuh keiklasan mentransfusikan sebagian darah mereka. Semoga semua pihak dapat mengambil manfaatnya dan berkah untuk kehidupan selanjutnya.

Senin, 28 Juni 2010

new hope


PT Nusantara Turbine and Propulsion (NTP) will start working on the focus of care market segments of commercial aircraft engines, especially the Pratt & Whitney 100 Series (PW100), which became widely used in Indonesia. read more

Sabtu, 26 Juni 2010

news




"PT NTP successfully obtained the FAA certification renewal"

Kamis, 24 Juni 2010

Benefits of FAA certification For PT NTP

PT NTP become a Certificated 14 CFR Part 145 Repair Station
The 14 CFR Part 145 certification process provides for interaction between the applicant and the FAA from initial inquiry to certificate issuance. It ensures that programs, systems, and intended methods of compliance are thoroughly reviewed, evaluated, and tested.

Certification demonstrates to our customers, competitors, suppliers, staff and investors that our use industry-respected best practices.
* Certification helps our to demonstrate to stakeholders that our business is run effectively
* The process of achieving and maintaining the certification also helps ensure that our are continually improving and refining our activities
* The regular assessment process will improve staff responsibility, commitment and motivation
* Certification can improve overall performance, remove uncertainty and widen market opportunities

Senin, 21 Juni 2010

Berlin DC-3 crash: Early evidence of engine failure

Preliminary evidence indicates that the German-operated Douglas DC-3 which crashed at Berlin Schonefeld today suffered a failure in its left engine after take-off. Read more

Kamis, 17 Juni 2010

Definition of mechanics

The science of mechanics deals with the effects of forces in causing or preventing
motion. Statics is the branch of mechanics that deals with bodies in equilibrium,
i.e., the forces acting on them cause them to remain at rest or to move with uniform velocity.
Dynamics is the branch of mechanics that deals with bodies not in equilibrium, i.e., the
forces acting on them cause them to move with non-uniform velocity. Kinetics is the
branch of dynamics that deals with both the forces acting on bodies and the motions that
they cause. Kinematics is the branch of dynamics that deals only with the motions of bodies
without reference to the forces that cause them.
Definitions of certain terms and quantities as used in mechanics follow:
Force may be defined simply as a push or a pull; the push or pull may result from the
force of contact between bodies or from a force, such as magnetism or gravitation, in which
no direct contact takes place.
Matter is any substance that occupies space; gases, liquids, solids, electrons, atoms,
molecules, etc., all fit this definition.
Inertia is the property of matter that causes it to resist any change in its motion or state of
rest.
Mass is a measure of the inertia of a body.
Work, in mechanics, is the product of force times distance and is expressed by a combination
of units of force and distance, as foot-pounds, inch-pounds, meter-kilograms, etc.
The metric SI unit of work is the joule, which is the work done when the point of application
of a force of one newton is displaced through a distance of one meter in the
direction of the force.
Power, in mechanics, is the product of force times distance divided by time; it measures
the performance of a given amount of work in a given time. It is the rate of doing work and
as such is expressed in foot-pounds per minute, foot-pounds per second, kilogram-meters
per second, etc. The metric SI unit is the watt, which is one joule per second.
Horsepower is the unit of power that has been adopted for engineering work. One horsepower
is equal to 33,000 foot-pounds per minute or 550 foot-pounds per second. The kilowatt,
used in electrical work, equals 1.34 horsepower; or 1 horsepower equals 0.746
kilowatt. However, in the metric SI, the term horsepower is not used, and the basic
unit of power is the watt. This unit, and the derived units milliwatt and kilowatt, for
example, are the same as those used in electrical work.
Torque or moment of a force is a measure of the tendency of the force to rotate the body
upon which it acts about an axis. The magnitude of the moment due to a force acting in a
plane perpendicular to some axis is obtained by multiplying the force by the perpendicular
distance from the axis to the line of action of the force. (If the axis of rotation is not perpendicular
to the plane of the force, then the components of the force in a plane perpendicular
to the axis of rotation are used to find the resultant moment of the force by finding the
moment of each component and adding these component moments algebraically.)
Moment or torque is commonly expressed in pound-feet, pound-inches, kilogram-meters,
etc. The metric SI unit is the newton-meter (N · m).
Velocity is the time-rate of change of distance and is expressed as distance divided by
time, that is, feet per second, miles per hour, centimeters per second, meters per second,
etc.

Selasa, 15 Juni 2010

About Rolls-Royce


About Rolls-Royce
1. Rolls-Royce, a world-leading provider of power systems and services for use on land, at sea and in the air, has established strong positions in its four global markets - civil aerospace, defense aerospace, marine and energy.
2. The company has a broad customer base including more than 600 airlines, 4,000 corporate and utility aircraft and helicopter operators, 160 armed forces, more than 2,000 marine customers, including 70 navies, and energy customers in nearly 120 countries. With facilities in 50 countries, Rolls-Royce employs more than 38,000 people worldwide and has businesses headquartered in the UK, US, Canada, Germany, Scandinavia and China. This global presence allows the Group to access long-term international growth opportunities with its technology, presence, partnerships and people.
3. In 2009, Rolls-Royce and its partners invested $1.4 billion in research and development, two thirds of which had the objective of further improving the environmental aspects of its products, in particular the reduction of emissions.
4. Rolls-Royce is the world-leading producer of light turbine engines in the helicopter market. The M250 line has produced over 30,000 engines, more than half of which are still in service with approximately 4,500 operators in 150 nations. The M250 family has accumulated over 200 million flight hours, providing an unmatched level of expertise in every conceivable operational condition.
5. Rolls-Royce turboshaft and turboprop engines provide power in the 300 shp to more than 7,300 shp range, powering over 200 aircraft models to date including the Bell 206/407/430 and AgustaWestland Super Lynx/AW159/T129. This creates a broad base of market opportunities for both rotary and fixed-winged aircraft.

nice note

"Value has a value only if its value is valued"

Minggu, 13 Juni 2010

EVOLUTION AND HISTORY OF THE INDONESIAN AVIATION INDUSTRY

EVOLUTION AND HISTORY OF
THE INDONESIAN AVIATION INDUSTRY

I. INTRODUCTION
The aircraft is a means of transportation which has a very important meaning for economic and defense development, especially realizing that Indonesia being an island-state with a geographical condition which is difficult to penetrate without adequate means of transportation. From the above mentioned condition, comes the thought that as an island-state Indonesia is in the position to have maritime and aviation industries. This has led to the birth of an aircraft industry in Indonesia.
read more

Jumat, 11 Juni 2010

Kamis, 03 Juni 2010

What is propulsion?

The word is derived from two Latin words: pro meaning before or forwards and pellere meaning to drive. Propulsion means to push forward or drive an object forward. A propulsion system is a machine that produces thrust to push an object forward. On airplanes, thrust is usually generated through some application of Newton's third law of action and reaction. A gas, or working fluid, is accelerated by the engine, and the reaction to this acceleration produces a force on the engine.

Rabu, 02 Juni 2010

Selasa, 01 Juni 2010

touring



Touring to Batu Karas
relax with friends When the holiday weekend

AIRCRAFT ENGINE AND INDUSTRIAL FUNDAMENTAL INSPECTION

AIRCRAFT ENGINE AND INDUSTRIAL FUNDAMENTAL INSPECTION

DEFINITION OF INSPECTION
Inspection is a critical examination of something, and the inspector in industry is supposed by the very of his title to examine products very closely, perhaps even more closely that the mechanic, and other employees performing other tasks on the products. Other industrial sense, an inspection is a critical examination directed to some pre-determined purpose. This is comparing of determine the conformance of a product to its specifications.